obdchina

ECU M35080V6 Programmer Product Introduction:

Type: car software	Voltage: N/A	Power: N/A
Certification: CE	Place of Origin: Guangdong China (Mainland)	Brand Name: OBD
Model Number: M35080V6 Programmer	type: ECU programmer	price: competitve

Easy to use Windows 98/2000/XP software

Read, Program, Erase Incremental RegistersEEPROM
Erase time to Delivery State* 1-3 seconds
Erase time to Delivery State for M35080V6 1-10 minutes
Supported all clock rates 2.5, 5.0 and 6 MHz IC’s.
On-board EEPROM programming for M35080V6

In-circuit/On-board EEPROM programming
Self-Check capabilities
Onboard processor ATmega16 allow to Firmware Update to new versions
4 adaptors for SO8 device

Additional items you’ll need to use this tool:

1) Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.obd
2) Power supply: An 12 Volt / 500 mA

NOTE: Delivery State: The first 32 bytes (incremental registers) are set to all “0″s, 16 words at $0000 The EEPROM memory array $0020-$3FFF set to all $FF. The Status register set to $10

Package included:

1. M35080V6 programmer
2. serial cable
3. CD of sofotware
4. 2 pcs SO8 board